LUCENT TECHNOLOGIES

VANTAGE VRS

Card Type   Telephony
I/O Options MVIP bus
Data Bus    16-bit ISA

[Image]

      CONNECTIONS

  Function     Label

  MVIP bus      J1

                           MVIP BUS TERMINATION

            Setting                      W1                   W2

  »          Terminated                Closed               Closed

           Not terminated               Open                 Open

                             BASE I/O ADDRESS

  Setting    J2/A     J2/B     J2/C     J2/D     J2/E     J2/F     J2/G

      000h   Closed   Closed   Closed   Closed   Closed   Closed   Closed

      008h   Closed   Closed   Closed   Closed   Closed   Closed   Open

      020h   Closed   Closed   Closed   Closed   Open     Closed   Closed

      028h   Closed   Closed   Closed   Closed   Open     Closed   Open

      030h   Closed   Closed   Closed   Closed   Open     Open     Closed

  »   300h   Open     Open     Closed   Closed   Closed   Closed   Closed

      3D8h   Open     Open     Open     Open     Closed   Open     Open

      3E0h   Open     Open     Open     Open     Open     Closed   Closed

      3E8h   Open     Open     Open     Open     Open     Closed   Open

      3F0h   Open     Open     Open     Open     Open     Open     Closed

      3F8h   Open     Open     Open     Open     Open     Open     Open

            Note: A total of 127 base address settings are available. The
            jumpers are a binary representation of the decimal memory
            addresses. J2/A is the Most Significant Bit and jumper J2/G
            is the Least Significant Bit. The jumpers have the following
            decimal values: J2/A=512, J2/B=256, J2/C=128, J2/D=64,
            J2/E=32, J2/F=16, J2/G=8. Open the jumpers and add the values
            of the open jumpers to obtain the correct memory address.
            (Open=1, Closed=0)